Products

Product Introduction 3 way ball valve is an important valve type, which is widely used in petrochemical and long-distance pipelines and other fields. Its closing part is a partial sphere with a hole, and the sphere rotates with the valve stem to realize the opening or closing of the valve. The...

The Three Way Ball Valve has a compact structure, beautiful appearance and good sealing performance. It can switch the flow direction of the medium in the pipeline, and can also connect or close two channels that are perpendicular to each other.

The Flanged Stainless Steel Ball Valve is completely isolated from the medium, and adopts low torque and high pressure resistance double-sided shooting, which completely isolates the contact between the valve body and the valve shaft and the fluid; the valve ball and the valve shaft adopt a pinless design, which is convenient for maintenance and disassembly. It is replaced with special anti-seize self-lubricating bearings inside the valve shaft, which eliminates the problem that the general ball valve cannot be closed.

Pneumatic Actuator Y type three Way Ball Valve has a flat flow channel, low fluid resistance and strong flow capacity. When switching, there is no retention of the medium, which will not cause secondary pollution. It can be equipped with electric actuator and pneumatic actuator to realize automatic control. For more information on valve parameters, performance indicators and please contact us!

Product Introduction Manual 1pc thread ball valve and flanged gate valve are the same type of valve. The difference is that its closing part is a ball. The ball rotates around the center line of the valve body to achieve opening and closing. The ball valve is mainly used to cut off, distribute...

Pneumatic 3PC stainless steel ball valve is mainly used to cut off or connect the medium in the pipeline, and can also be used for fluid regulation and control. Compared with other valves, it has the following advantages.

Pneumatic Actuator 3PCThread Ball Valve consists of a three-part valve housing, which consists of four longer bolts that clamp the middle valve body and valve ball from both ends. The advantage is that it is not necessary to remove the pipeline thread during maintenance and disassembly, but directly remove the four bolts, and the middle part of the valve body can be taken out.

Pneumatic Actuator Jacketed Flange Ball Vavle, product customization is Simple, Fast and Economical. Allow us to help strengthen and preserve your identity by personalizing 1pc ball valve. Bolt these valves to ANSI flanges. Their lockable lever handle can be fixed in place using a padlock (not included). These valves have four mounting holes for attaching an actuator.

Pneumatic Actuator Stainless Steel Flange Ball Valve can be customized and passed strict quality control before leaving the factory. If you are interested in this product, please contact us!

The Pneumatic Actuator Three Way Stainless Steel Ball Valve has a compact structure, beautiful appearance and good sealing performance. It can switch the flow direction of the medium in the pipeline, and can also connect or close two channels that are perpendicular to each other.

Pneumatic Actuator WCB Flange Ball Valve is a high-quality product that our company can provide you.These valves are manufactured in accordance with industry guidelines under the supervision of our experienced team.

Three Stage Pneumatic ball valve is a ball valve equipped with a pneumatic actuator. The execution speed of the pneumatic actuator is relatively fast. The fastest switching speed is 0.05 seconds/time, so it is usually called a pneumatic quick-cut ball valve.